Hydraulic Pump Assembly VOE14625963 VOE 14625963 K5V200DTH Fits for Volvo EC460B EC480D 7c3bf070 155d 44ed aeed 9a9e86ab3a13.jpg

VOE14625963 14625963 Hydraulic Pump Assembly VOE for Volvo EC460B EC480D

Made for Sumitomo Case SH60, 9007B and 9007, this aftermarket new hydraulic pump assembly (167684A1) is the heart of the hydraulic system, turning engine rotation into pressurized oil.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

167684A1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Sumitomo Case, including SH60, 9007B, 9007. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

167684A1 Hydraulic Pump Assembly Specifications

Product Type: Hydraulic Pump Assembly
Part Number: 167684A1
Compatible Brand: Sumitomo Case
Condition: new, aftermarket
Country of Origin: China

Sumitomo Case Models Compatible with the 167684A1 Hydraulic Pump Assembly

Fits for Sumitomo SH60

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 167684A1 Hydraulic Pump Assembly

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 167684A1 Hydraulic Pump Assembly?

The 167684A1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Sumitomo Case , supplied as new, aftermarket under part number 167684A1.

Which Sumitomo Case models does the 167684A1 Hydraulic Pump Assembly fit?

It is listed for SH60, 9007B, 9007. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.