294200-0670 Suction Control Valve is an aftermarket replacement suction control valve for Isuzu & Hino machines, including 6HK1, JO8 and other listed models. In a common rail diesel engine the pressure valves regulate, limit or relieve fuel pressure so the injectors always work within the correct range. It is supplied by LIONKITS as aftermarket new with a 3-month warranty.
294200-0670 Suction Control Valve Specifications
- Product Type: Suction Control Valve
- Part Number: 294200-0670
- Compatible Brand: Isuzu & Hino
- Condition: Aftermarket new
- Warranty: 3 months
- Brand: LIONKITS
- Country of Origin: China
Isuzu & Hino Models Compatible with the 294200-0670 Suction Control Valve
- Isuzu 6HK1
- HINO JO8
- Case Excavator CX300C
- Nissan John Deere
Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.
What Does a Fuel Pressure Valve Do?
In a common rail diesel engine the pressure valves regulate, limit or relieve fuel pressure so the injectors always work within the correct range. A pressure control valve sets how much pressure the rail holds, a pressure limiter or relief valve opens to protect the rail if pressure gets too high, and an overflow valve returns excess fuel.
Signs the Valve Needs Replacing
- Hard starting or long cranking: the rail cannot build or hold the right pressure.
- Rough idle or stalling: unstable rail pressure upsets injection.
- Loss of power or smoke: wrong fuel pressure shows up as weak acceleration or black smoke.
- Rail pressure fault codes: the ECU logs low or uncontrolled rail pressure.
- Fuel leaks: diesel at the valve or its fittings points to a failed seal.
These symptoms overlap with worn pumps, dirty oil and clogged filters, so check the basics and measure pressure before replacing the valve.
How to Order and Install the 294200-0670 Suction Control Valve
- Confirm your machine model, engine model and the part number on your existing valve before ordering.
- Send a photo of the nameplate or the old valve if you are not sure; LIONKITS will confirm fitment for you.
- Depressurize the fuel system as the service manual specifies and keep everything clean; never loosen high-pressure parts on a running engine.
- Replace the O-rings or sealing washers and tighten to the specified torque.
- Replace the fuel filters, start the engine, check for leaks and read the rail pressure with a diagnostic tool.
Shipping, Payment and Support
- Preparation time: 2-3 working days
- Delivery time: 3-7 working days
- Shipping methods: DHL, FedEx, UPS, TNT, USPS EMS
- Payment methods: Credit Card, PayPal
- Order tracking: A tracking number with a tracking link is sent by email once the order ships.
Frequently Asked Questions
What is the 294200-0670 Suction Control Valve?
The 294200-0670 Suction Control Valve is an aftermarket replacement suction control valve for Isuzu & Hino machines, supplied as aftermarket new under part number 294200-0670.
Which Isuzu & Hino models does the 294200-0670 Suction Control Valve fit?
It is listed for 6HK1, JO8 and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.
How do I know a fuel pressure valve has failed?
Typical signs are hard starting, rough idle or stalling, loss of power, black smoke, rail pressure fault codes and fuel leaks.
What are the warranty and delivery terms for the 294200-0670 Suction Control Valve?
Warranty: 3 months. Typically, orders are prepared in 2-3 working days and delivery takes 3-7 working days. Shipping by DHL, FedEx, UPS, TNT, USPS EMS.
Be the first to review “Suction Control Valve 294200-0670 for Isuzu & Hino 6HK1 JO8”
Related products
Reviews
There are no reviews yet.