PR4-3X/4,00-700RK01M08 Rexroth Radial Piston Pump is a Rexroth radial piston pump rated 4.32 cm3, 700 bar, 5.5 l/min. A radial piston pump arranges its pistons around the drive shaft and is built for high operating pressure, so it is used where a compact pump has to hold hundreds of bar in industrial hydraulic systems. Supplied by LIONKITS.
PR4-3X/4,00-700RK01M08 Rexroth Radial Piston Pump Specifications
- Product Type: Rexroth Radial Piston Pump
- Part Number: PR4-3X/4,00-700RK01M08, R901480148
- Displacement: 4.32 cm3
- Max Pressure: 700 bar
- Max Flow: 5.5 l/min
- Connection Diagram: 5
- Through-Drive: with
- Shaft Type: Cylindrical shaft end with output for AZPF or AZPFF attachment
- Hydraulic Fluid: HLP
- Direction of Rotation: clockwise rotation
- Mounting: 4-bolt M8 face mounting, centering 63 mm
- Seals: NBR
- Product Weight: 11.83 kg
- Country of Origin: China
What Does a Radial Piston Pump Do?
A radial piston pump arranges its pistons around the drive shaft and is built for high operating pressure, so it is used where a compact pump has to hold hundreds of bar in industrial hydraulic systems. The type code of this pump gives its displacement, maximum pressure, direction of rotation and mounting.
Signs the Part Needs Replacing
- Low or unstable system pressure: internal leakage means the pump cannot hold its rated pressure.
- Reduced flow and slow actuators: worn pistons or valves lose volumetric efficiency.
- Hot oil and noise: internal bypass heats the oil and worn parts or air cause noise.
- Metal particles in the filter or tank: wear debris shows up in the oil.
These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.
How to Order and Install the PR4-3X/4,00-700RK01M08 Rexroth Radial Piston Pump
- Confirm your machine model, the part number and the pump model on your existing pump before ordering.
- Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
- Check the type code against the nameplate of the old pump, including displacement, pressure rating, direction of rotation and the mounting face.
- Flush the system and replace the hydraulic oil and filters before fitting the new pump; contamination is the main cause of early pump wear.
- Fill the pump housing with clean hydraulic fluid and prime it before the first start.
- Check shaft alignment, mounting bolt torque and the suction line for air leaks, then run at low pressure first and check for leaks and noise.
Frequently Asked Questions
What is the PR4-3X/4,00-700RK01M08 Rexroth Radial Piston Pump?
The PR4-3X/4,00-700RK01M08 Rexroth Radial Piston Pump is a replacement Rexroth radial piston pump under part numbers PR4-3X/4,00-700RK01M08, R901480148.
How do I read the type code of a Rexroth PR4 radial piston pump?
The code lists the series, the displacement size, the maximum pressure (for example 500 or 700 bar), the shaft and mounting version and the direction of rotation. Compare every part of the code with your old pump before ordering.



Reviews
There are no reviews yet.