Original Nachi Hydraulic Pump PVD 2B 44P 12G PVD 2B 40P for Wacker Neuson 3500 288ce30c 677c 492f b28b 2f684f68b25d.jpg

PVD-2B-44P-12G PVD-2B-40P Nachi Hydraulic Pump for Wacker Neuson 3500

Made for Cummins ISD4.5, QSB5.9-44, ISB6.7 and B5.9 engines, this hydraulic pump (4937418) supplies the oil flow and pressure the machine hydraulics work with. It also appears under part number C4937418.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

4937418 Hydraulic Pump is a replacement hydraulic pump for Cummins engines, including ISD4.5, QSB5.9-44, ISB6.7, B5.9. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new original.

4937418 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: 4937418, C4937418
Compatible Brand: Cummins
Machine Type: Engine
Condition: New Original
Country of Origin: China

Cummins Models Compatible with the 4937418 Hydraulic Pump

Cummins Engine: ISD4.5, QSB5.9-44, ISB6.7, B5.9

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 4937418 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 4937418 Hydraulic Pump?

The 4937418 Hydraulic Pump is a replacement hydraulic pump for Cummins engines, supplied as new original under part numbers 4937418, C4937418.

Which Cummins models does the 4937418 Hydraulic Pump fit?

It is listed for ISD4.5, QSB5.9-44, ISB6.7, B5.9. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.