Hydraulic Pump Assembly KLJ0653 87341976 K3V63DTP Fits for Case CX130 CX135 CX160 1dc4a3a8 356f 42f1 914f 3b295071845a.jpg

KLJ0653 87341976 Hydraulic Pump Assembly for Case CX130 CX135 CX160

For Caterpillar Cat E304E and 304E: an aftermarket new hydraulic pump, part number PSVD2-21E that supplies the oil flow and pressure the machine hydraulics work with. It also cross-references 416-5057 and 4165057.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

PSVD2-21E Hydraulic Pump is an aftermarket replacement hydraulic pump for Caterpillar Cat, including E304E, 304E. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

PSVD2-21E Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: PSVD2-21E, 416-5057, 4165057
Compatible Brand: Caterpillar Cat
Condition: new, aftermarket
Country of Origin: China

Caterpillar Cat Models Compatible with the PSVD2-21E Hydraulic Pump

Fitments: 304E Mini Hydraulic Excavator TTN00001-UP (MACHINE)
304E Mini Hydraulic Excavator SSC00001-UP (MACHINE)
304E Mini Hydraulic Excavator TSR00001-UP (MACHINE)

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the PSVD2-21E Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the PSVD2-21E Hydraulic Pump?

The PSVD2-21E Hydraulic Pump is an aftermarket replacement hydraulic pump for Caterpillar Cat , supplied as new, aftermarket under part numbers PSVD2-21E, 416-5057, 4165057.

Which Caterpillar Cat models does the PSVD2-21E Hydraulic Pump fit?

It is listed for E304E, 304E and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.