311 95413119541HydraulicPumpforCatCaterpillar330C330CLExcavator.jpg

Hydraulic Pump 311-9541 3119541 for Cat Caterpillar L 330C/330C Excavator

A hydraulic pump for CAT Caterpillar 329E, 329F and 330F excavators, part number 339-0514. The pump feeds pressurized oil to the cylinders and motors so the machine can dig, lift and travel.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

339-0514 Hydraulic Pump is a replacement hydraulic pump for CAT Caterpillar excavators, including 329E, 329F, 330F. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as genuine refurbished with a 3-month warranty.

339-0514 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: 339-0514, 3390514
Compatible Brand: CAT Caterpillar
Machine Type: Excavator
Condition: Genuine Refurbished
Warranty: 3 Months
Brand: LIONKITS
Country of Origin: China

CAT Caterpillar Models Compatible with the 339-0514 Hydraulic Pump

Caterpillar 329E 329F 330F
ect

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 339-0514 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Shipping, Payment and Support

Shipping methods: DHL, FedEx, UPS, TNT, USPS EMS
Payment methods: T/T, Western Union, PayPal

Frequently Asked Questions

What is the 339-0514 Hydraulic Pump?

The 339-0514 Hydraulic Pump is a replacement hydraulic pump for CAT Caterpillar excavators, supplied as genuine refurbished under part numbers 339-0514, 3390514.

Which CAT Caterpillar models does the 339-0514 Hydraulic Pump fit?

It is listed for 329E, 329F, 330F and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.