Hydraulic Pump AL82777 Fits for John Deere Tractor 6010 6100 6110 6210 6320 6800 6820 6900 6920 6320S 6910S 7c4bf570 a2fc 488f 9bd4 6eb2eb0d63ec.jpg

AL82777 Hydraulic Pump for John Deere 6010 6100 6110 6210 6320 6800 Tractor

Made for John Deere 6110, 6520, 6600 and 6620 tractors, this hydraulic pump (AL161041) supplies the oil flow and pressure the machine hydraulics work with. It also cross-references AL151514 and AL157201.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

AL161041 Hydraulic Pump is a replacement hydraulic pump for John Deere tractors, including 6110, 6520, 6600, 6620, 6800. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

AL161041 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: AL161041, AL151514, AL157201
Compatible Brand: John Deere
Machine Type: Tractor
Country of Origin: China

John Deere Models Compatible with the AL161041 Hydraulic Pump

John Deere Tractor: 6010, 6020, 6100, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6500, 6506, 6510, 6520
John Deere Engine: 4039TL001, 4039TL003, 4039TL004, 4039TL006, 4039TL007, 4045DL001, 4045DL002, 4045DL050, 4045DL070, 4045HL070

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the AL161041 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the AL161041 Hydraulic Pump?

The AL161041 Hydraulic Pump is a replacement hydraulic pump for John Deere tractors under part numbers AL161041, AL151514, AL157201.

Which John Deere models does the AL161041 Hydraulic Pump fit?

It is listed for 6110, 6520, 6600, 6620, 6800, 6810, 6910, 6150S and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.