Hydraulic Pump 708 1W 00042 708 1W 01042 Fits for Komatsu PC60 PC70 BR100J BR100JG BR100R R100RG afe00cc4 cf3a 447d 8e96 3202f88ce12e.jpg

708-1W-00042 708-1W-01042 Hydraulic Pump for Komatsu PC60 PC70 BR100J

A hydraulic pump ass’y for Komatsu WA800-3E0, WA900-3 and WA900L-3 wheel loaders, part number 705-58-45030. The pump feeds pressurized oil to the cylinders and motors so the machine can dig, lift and travel.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

705-58-45030 Hydraulic Pump Ass’y is a replacement hydraulic pump ass’y for Komatsu wheel loaders, including WA800-3E0, WA900-3, WA900L-3. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

705-58-45030 Hydraulic Pump Ass’y Specifications

Product Type: Hydraulic Pump Ass’y
Part Number: 705-58-45030, 7055845030, 70001-70029, 70030-UP, 50001-UP, 60001-60077, 60078-UP, 52001-UP
Compatible Brand: Komatsu
Machine Type: Wheel Loader
Country of Origin: China

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 705-58-45030 Hydraulic Pump Ass’y

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 705-58-45030 Hydraulic Pump Ass’y?

The 705-58-45030 Hydraulic Pump Ass’y is a replacement hydraulic pump ass’y for Komatsu wheel loaders under part numbers 705-58-45030, 7055845030, 70001-70029, 70030-UP.

Which Komatsu models does the 705-58-45030 Hydraulic Pump Ass’y fit?

It is listed for WA800-3E0, WA900-3, WA900L-3. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.