Hydraulic Pump 705 41 08250 Fits for Komatsu Excavator PC12UU 2 b28585a0 3cb4 4667 a9dd 0018906c3979.jpg

705-41-08250 Hydraulic Pump for Komatsu PC12UU-2 Excavator

This hydraulic pump is listed for Komatsu D66S-1 bulldozers, part number 705-51-30110. It is the heart of the hydraulic system, turning engine rotation into pressurized oil.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

705-51-30110 Hydraulic Pump is a replacement hydraulic pump for Komatsu bulldozers, including D66S-1. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

705-51-30110 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: 705-51-30110, 7055130110
Compatible Brand: Komatsu
Machine Type: Bulldozer
Country of Origin: China

Komatsu Models Compatible with the 705-51-30110 Hydraulic Pump

Komatsu Bulldozer: D66S-1

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 705-51-30110 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 705-51-30110 Hydraulic Pump?

The 705-51-30110 Hydraulic Pump is a replacement hydraulic pump for Komatsu bulldozers under part numbers 705-51-30110, 7055130110.

Which Komatsu models does the 705-51-30110 Hydraulic Pump fit?

It is listed for D66S-1. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.