Hydraulic Pump 262 5203 2625203 Fits for Caterpillar CAT TH460B TH560B TH560B 3054E 3054 Engine 79f84e11 6d89 476b 969a 6e78f49a2d50.jpg

262-5203 2625203 Hydraulic Pump for Caterpillar CAT TH460B TH560B Engine

A hydraulic pump for Caterpillar CAT 24M and C18 motor grader engines, part number 291-0061. The pump feeds pressurized oil to the cylinders and motors so the machine can dig, lift and travel. It also appears under part number CA2910061.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

291-0061 Hydraulic Pump is a replacement hydraulic pump for Caterpillar CAT motor grader engines, including 24M, C18. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

291-0061 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: 291-0061, 2910061, CA2910061
Compatible Brand: Caterpillar CAT
Machine Type: Motor Grader Engine
Country of Origin: China

Caterpillar CAT Models Compatible with the 291-0061 Hydraulic Pump

24M Motor Grader B9K00001-UP (MACHINE) POWERED BY C18 Engine

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 291-0061 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 291-0061 Hydraulic Pump?

The 291-0061 Hydraulic Pump is a replacement hydraulic pump for Caterpillar CAT motor grader engines under part numbers 291-0061, 2910061, CA2910061.

Which Caterpillar CAT models does the 291-0061 Hydraulic Pump fit?

It is listed for 24M, C18. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.