Hydraulic Pump 165 6767 0R 7949 Fits for Caterpillar D350E II D400E II f33d21da f6bd 47f7 9377 4ec18d1cf380.jpg

165-6767 0R-7949 Hydraulic Pump for Caterpillar II II D350E D400E

A kayaba kyb hydraulic pump for Kubota KX183, KX185, KX186 and KX185-3, part number PSVL2-36CG-2. The pump feeds pressurized oil to the cylinders and motors so the machine can dig, lift and travel. It also cross-references B0610-36003 and B061036003.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

PSVL2-36CG-2 Kayaba KYB Hydraulic Pump is a replacement kayaba kyb hydraulic pump for Kubota, including KX183, KX185, KX186, KX185-3, KX080-3. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, original, part number: b0610-36003, b061036003.

PSVL2-36CG-2 Kayaba KYB Hydraulic Pump Specifications

Product Type: Kayaba KYB Hydraulic Pump
Part Number: PSVL2-36CG-2, B0610-36003, B061036003
Compatible Brand: Kubota
Condition: new, original, Part number: B0610-36003, B061036003
Country of Origin: China

Kubota Models Compatible with the PSVL2-36CG-2 Kayaba KYB Hydraulic Pump

Fits for Kubota KX183
KX185
KX186
KX185-3
KX080-3
KX80

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the PSVL2-36CG-2 Kayaba KYB Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the PSVL2-36CG-2 Kayaba KYB Hydraulic Pump?

The PSVL2-36CG-2 Kayaba KYB Hydraulic Pump is a replacement kayaba kyb hydraulic pump for Kubota , supplied as new, original, part number: b0610-36003, b061036003 under part numbers PSVL2-36CG-2, B0610-36003, B061036003.

Which Kubota models does the PSVL2-36CG-2 Kayaba KYB Hydraulic Pump fit?

It is listed for KX183, KX185, KX186, KX185-3, KX080-3, KX80 and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.