Main Hydraulic Pump 1142 00011 for Samsung SE210LC 3 Excavator 979ff68f 7e8c 4764 8ae2 1dc70fb4a91d.jpg

1142-00011 Main Hydraulic Pump for Samsung SE210LC-3 Volvo Excavator Excavator

A hydraulic pump of power pack for Eaton Vickers, part number PVH141. The pump feeds pressurized oil to the cylinders and motors so the machine can dig, lift and travel.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

PVH141 Hydraulic Pump of Power Pack is a replacement hydraulic pump of power pack for Eaton Vickers. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

PVH141 Hydraulic Pump of Power Pack Specifications

Product Type: Hydraulic Pump of Power Pack
Part Number: PVH141
Compatible Brand: Eaton Vickers
Country of Origin: China

Eaton Vickers Models Compatible with the PVH141 Hydraulic Pump of Power Pack

For Eaton Vickers

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the PVH141 Hydraulic Pump of Power Pack

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the PVH141 Hydraulic Pump of Power Pack?

The PVH141 Hydraulic Pump of Power Pack is a replacement hydraulic pump of power pack for Eaton Vickers under part number PVH141.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.