PVQ13 A2R SE1F 20 CM5 12HydraulicPumpforVickers.png

Hydraulic Pump PVQ13-A2R-SE1F-20-CM5-12 for Vickers

$849.00

PVQ13-A2L-SS1S-20-CM7-12 is a hydraulic pump for Vickers. It is the heart of the hydraulic system, turning engine rotation into pressurized oil. Unit weight is about 12 kg.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump is a replacement hydraulic pump for Vickers. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as communication confirmed with a 12-month warranty.

PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: PVQ13-A2L-SS1S-20-CM7-12
Compatible Brand: Vickers
Condition: Communication Confirmed
Product Weight: 12kg/26.46pounds (1 piece)
Warranty: 1-12 months
Brand: LIONKITS
Country of Origin: China

Vickers Models Compatible with the PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump

Vickers

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Shipping, Payment and Support

Lead time: 6-8 working days
Delivery time: 5-12 days by air, 35-45 days by sea, Notes 1, We will give you a reply within 12 hours., Notes 2, Please send us a picture of your hydraulic pump so we can check it
Payment methods: Credit Card, PayPal, T/T, Western Union

Frequently Asked Questions

What is the PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump?

The PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump is a replacement hydraulic pump for Vickers , supplied as communication confirmed under part number PVQ13-A2L-SS1S-20-CM7-12.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.

What are the warranty and delivery terms for the PVQ13-A2L-SS1S-20-CM7-12 Hydraulic Pump?

Warranty: 1-12 months. Typically, delivery takes 5-12 days by air, 35-45 days by sea, Notes 1, We will give you a reply within 12 hours., Notes 2, Please send us a picture of your hydraulic pump so we can check it.