31N3 10010 excavator hydraulic pump K3V63DT for R140LC 7 ZW ZHTE 01 befdbea3 3ae2 4edb 8d04 1d1766f18b44.jpg

hydraulic pump 31N3-10010 K3V63DT for R140LC-7 excavator

14531858 is a hydraulic pump for EC140 and EC140B excavators. It delivers the flow and pressure that every hydraulic function depends on.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

14531858 hydraulic pump is a replacement hydraulic pump for excavators, including EC140, EC140B. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new.

14531858 hydraulic pump Specifications

Product Type: hydraulic pump
Part Number: 14531858, K3V63DT
Pump Model: K3V63DT
Machine Type: excavator
Condition: New
Country of Origin: China

Models Compatible with the 14531858 hydraulic pump

EC140 EC140B

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 14531858 hydraulic pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Shipping, Payment and Support

Packing: WOODEN NEUTRAL PACKAGE

Frequently Asked Questions

What is the 14531858 hydraulic pump?

The 14531858 hydraulic pump is a replacement hydraulic pump, supplied as new under part numbers 14531858, K3V63DT.

Which models does the 14531858 hydraulic pump fit?

It is listed for EC140, EC140B. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.