Hydraulic Pump AT223519 AT514214 Fits For John Deere Tractor 544H TC54H 544H LL 73fad75a 21e2 444a a24a 5fb6f957182f.jpg

AT223519 AT514214 Hydraulic Pump for John Deere 544H TC54H 544H LL Tractor

This aftermarket new hydraulic pump is listed for John Deere 6415, 6430, 6605 and 6615, part number AL156335. It is the heart of the hydraulic system, turning engine rotation into pressurized oil.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

AL156335 Hydraulic Pump is an aftermarket replacement hydraulic pump for John Deere, including 6415, 6430, 6605, 6615, 6715. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

AL156335 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: AL156335, Al156335
Compatible Brand: John Deere
Condition: new, aftermarket
Country of Origin: China

John Deere Models Compatible with the AL156335 Hydraulic Pump

Fitments: Fits for John Deere Tractor 6010, 6110J, 6120, 6125J, 6130, 6130J, 6215, 6230, 6300, 6310, 6320, 6330, 6405, 6415, 6425, 6430, 6510, 6520, 6530, 6605, 6615, 6630, 6830, 6930, 7130, 7230, 7330, 7500, 7505, SE6010, SE6020, SE6100

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the AL156335 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the AL156335 Hydraulic Pump?

The AL156335 Hydraulic Pump is an aftermarket replacement hydraulic pump for John Deere , supplied as new, aftermarket under part numbers AL156335, Al156335.

Which John Deere models does the AL156335 Hydraulic Pump fit?

It is listed for 6415, 6430, 6605, 6615, 6715, 7130. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.