Hydraulic Pump Assembly VOE14641331 14641331 K3V140DT Fits For Volvo EC290B EC290C 7ae60c59 3522 4d10 a0b8 cb49930ace32.jpg

VOE14641331 14641331 Hydraulic Pump Assembly for Volvo EC290B EC290C

An aftermarket new hydraulic pump for Hitachi ZX230-3, ZX250-3 and ZX270-3, part number HPV118HW-23B. The pump delivers the flow and pressure that every hydraulic function depends on. It also cross-references 9195235 and 9262319.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

HPV118HW-23B Hydraulic Pump is an aftermarket replacement hydraulic pump for Hitachi, including ZX230-3, ZX250-3, ZX270-3. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

HPV118HW-23B Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: HPV118HW-23B, 9195235, 9262319
Compatible Brand: Hitachi
Condition: new, aftermarket
Country of Origin: China

Hitachi Models Compatible with the HPV118HW-23B Hydraulic Pump

Fits for Hitachi ZX230-3
ZX250-3
ZX270-3
IZX200
IZX200LC
IZX210F
IZX210MF
MA200-G
ZX200
ZX200-3-HCMC
ZX200-3G
ZX200-E
ZX200-HHE
ZX200-X
ZX200LC-HHE
ZX210-AMS
ZX210-HCME
ZX210H
ZX210H-3G
ZX210K
ZX210K-3G
ZX210LC-3G
ZX210N-A

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the HPV118HW-23B Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the HPV118HW-23B Hydraulic Pump?

The HPV118HW-23B Hydraulic Pump is an aftermarket replacement hydraulic pump for Hitachi , supplied as new, aftermarket under part numbers HPV118HW-23B, 9195235, 9262319.

Which Hitachi models does the HPV118HW-23B Hydraulic Pump fit?

It is listed for ZX230-3, ZX250-3, ZX270-3 and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.