Hydraulic Pump Assembly YY10V00009F4 YY10V00009F6 Fits for Kobelco SK135SR SK140 8 SK130 8 SK160 8 c82d44c3 5e72 4b07 abe0 51a91da2af3b.jpg

YY10V00009F4 YY10V00009F6 Hydraulic Pump Assembly for Kobelco SK135SR SK140-8

Made for Kobelco MARK III SK300, SK300-3 and SK300LC, this aftermarket new hydraulic pump assembly (24100N782F1) supplies the oil flow and pressure the machine hydraulics work with.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

24100N782F1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Kobelco MARK III, including SK300, SK300-3, SK300LC. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

24100N782F1 Hydraulic Pump Assembly Specifications

Product Type: Hydraulic Pump Assembly
Part Number: 24100N782F1
Compatible Brand: Kobelco MARK III
Condition: new, aftermarket
Country of Origin: China

Kobelco MARK III Models Compatible with the 24100N782F1 Hydraulic Pump Assembly

Fits for Kobelco SK300 MARK III
SK300-3
SK300LC

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 24100N782F1 Hydraulic Pump Assembly

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 24100N782F1 Hydraulic Pump Assembly?

The 24100N782F1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Kobelco MARK III , supplied as new, aftermarket under part number 24100N782F1.

Which Kobelco MARK III models does the 24100N782F1 Hydraulic Pump Assembly fit?

It is listed for SK300, SK300-3, SK300LC and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.