Hydraulic Pump Assembly YY10V00016F4 YY10V00016F1 Fits for Kobelco ED150 ED160 44224f28 0be8 490e 8f77 c64f6b8a61dd.jpg

YY10V00016F4 YY10V00016F1 Hydraulic Pump Assembly for Kobelco ED150 ED160

This aftermarket new hydraulic pump is listed for Kobelco ED195LC-8 and SK170-8, part number YM10V00005F5. It supplies the oil flow and pressure the machine hydraulics work with. It also appears under part number YM10V00005F1.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

YM10V00005F5 Hydraulic Pump is an aftermarket replacement hydraulic pump for Kobelco, including ED195LC-8, SK170-8. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

YM10V00005F5 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: YM10V00005F5, YM10V00005F1
Compatible Brand: Kobelco
Condition: new, aftermarket
Country of Origin: China

Kobelco Models Compatible with the YM10V00005F5 Hydraulic Pump

Fits for Kobelco ED195LC-8
SK170-8

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the YM10V00005F5 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the YM10V00005F5 Hydraulic Pump?

The YM10V00005F5 Hydraulic Pump is an aftermarket replacement hydraulic pump for Kobelco , supplied as new, aftermarket under part numbers YM10V00005F5, YM10V00005F1.

Which Kobelco models does the YM10V00005F5 Hydraulic Pump fit?

It is listed for ED195LC-8, SK170-8 and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.