Kawasaki K3V112DT 1CGR HN0P Main Hydraulic Pump K9001902A K1000698G Fits for Komatsu Doosan Daewoo Excavator DX220A DX220LC 06ef17cf ee02 4419 8e7d 05aa24289915.jpg

K3V112DT-1CGR-HN0P Kawasaki Main Hydraulic Pump for Komatsu Doosan Daewoo DX220A Excavator

Part VOE14569675 is a main hydraulic pump covering Volvo EC460C, EC460CL, EC460CHR and EC460CLD excavators. In service it supplies the oil flow and pressure the machine hydraulics work with. It also cross-references VOE14595548 and 14569675.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

VOE14569675 Main Hydraulic Pump is a replacement main hydraulic pump for Volvo excavators, including EC460C, EC460CL, EC460CHR, EC460CLD, EC480D. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

VOE14569675 Main Hydraulic Pump Specifications

Product Type: Main Hydraulic Pump
Part Number: VOE14569675, VOE14595548, 14569675, 14595548
Compatible Brand: Volvo
Machine Type: Excavator
Country of Origin: China

Volvo Models Compatible with the VOE14569675 Main Hydraulic Pump

the following models
Volvo Pipelayer: PL4809D
Volvo Excavator: EC460C, EC460C L, EC460C HR, EC460C LD, EC480D, EC480D HR

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the VOE14569675 Main Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the VOE14569675 Main Hydraulic Pump?

The VOE14569675 Main Hydraulic Pump is a replacement main hydraulic pump for Volvo excavators under part numbers VOE14569675, VOE14595548, 14569675, 14595548.

Which Volvo models does the VOE14569675 Main Hydraulic Pump fit?

It is listed for EC460C, EC460CL, EC460CHR, EC460CLD, EC480D and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.