Hydraulic Pump PVD 2B 36L3DPS 86 4117F Fits for Kubota K035 f02fa2bf 5b16 4c48 87e4 cc1321dcdbef.jpg

PVD-2B-36L3DPS-86-4117F Hydraulic Pump for Kubota K035

PM10V00013F1 is an aftermarket new hydraulic pump assembly for Kobelco SK25SR-2, E20SR and AP2D12. It converts engine power into the hydraulic flow and pressure that moves the boom, arm, bucket, swing and travel. It also appears under part number PM10V00013F2.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

PM10V00013F1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Kobelco, including SK25SR-2, E20SR, AP2D12. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS as new, aftermarket.

PM10V00013F1 Hydraulic Pump Assembly Specifications

Product Type: Hydraulic Pump Assembly
Part Number: PM10V00013F1, PM10V00013F2
Compatible Brand: Kobelco
Condition: new, aftermarket
Country of Origin: China

Kobelco Models Compatible with the PM10V00013F1 Hydraulic Pump Assembly

Fitments: (SK25SR-2) – COMPACT EXCAVATOR ASN PV08-20001 (1/01-12/04)
(SK25SR-2) – COMPACT EXCAVATOR ASN PV09-22001- (3/01-12/04)

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the PM10V00013F1 Hydraulic Pump Assembly

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the PM10V00013F1 Hydraulic Pump Assembly?

The PM10V00013F1 Hydraulic Pump Assembly is an aftermarket replacement hydraulic pump assembly for Kobelco , supplied as new, aftermarket under part numbers PM10V00013F1, PM10V00013F2.

Which Kobelco models does the PM10V00013F1 Hydraulic Pump Assembly fit?

It is listed for SK25SR-2, E20SR, AP2D12 and other models in the compatibility list above. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.