Hydraulic Pump 67110 36840 71 for Toyota Forklift 8FD35 8FD40N e0f56899 0112 4a60 a617 5e2922a4e153.jpg

67110-36840-71 Hydraulic Pump for Toyota 8FD35 8FD40N Forklift

Made for Mitsubishi FD135N-150N, F15D, 6M60-TL and FD150N forklifts, this hydraulic pump (92G71-00100) delivers the flow and pressure that every hydraulic function depends on.

Category: Hydraulic Pump Assembly

Description
Reviews (0)

92G71-00100 Hydraulic Pump is a replacement hydraulic pump for Mitsubishi forklifts, including FD135N-150N, F15D, 6M60-TL, FD150N, F24B. The main hydraulic pump converts engine power into pressurized oil flow. Supplied by LIONKITS.

92G71-00100 Hydraulic Pump Specifications

Product Type: Hydraulic Pump
Part Number: 92G71-00100, 92G7100100
Compatible Brand: Mitsubishi
Machine Type: Forklift
Country of Origin: China

Mitsubishi Models Compatible with the 92G71-00100 Hydraulic Pump

Mitsubishi Forklift: FD135N-150N, F15D, 6M60-TL, FD150N, F24B

Your model is not listed? Contact LIONKITS via live chat or email with your machine model and nameplate photo, and we will confirm compatibility.

What Does a Hydraulic Pump Do?

The main hydraulic pump converts engine power into pressurized oil flow. That oil moves the boom, arm, bucket, swing and travel functions, so every machine movement depends on it. Because it takes the most punishment, it is usually the first major hydraulic component to wear out.

Signs the Part Needs Replacing

Slow or weak movement on all functions: when everything is slow at once, not just one circuit, the pump is the most likely source.
Whining, knocking or grinding noise: internal wear or cavitation, especially on start-up or when the oil is cold.
Hydraulic oil running hot: internal bypass leakage turns pressure into heat.
Metal particles in the filter or case drain: a failing pump sheds metal and pushes out more case drain flow.
Erratic or spongy movement, foamy oil: air entering the suction line, or aeration, upsets pump flow.

These symptoms overlap with clogged filters, low oil, air in the suction line and worn valves, so check the filters and oil level before replacing the part.

How to Order and Install the 92G71-00100 Hydraulic Pump

Confirm your machine model, the part number and the pump model on your existing pump before ordering.
Send a photo of the old pump or the nameplate if you are not sure; LIONKITS will confirm fitment for you.
Change the hydraulic oil and the return filters before fitting the new pump; a new pump installed in contaminated oil will fail early.
If the old pump failed internally and shed metal, flush the tank, hoses and oil cooler and inspect the control valve and motors for contamination.
Fill the pump case with clean hydraulic oil and prime the pump as the service manual specifies before the first start.
Check the suction line, strainer and fittings for air leaks, and tighten bolts to the specified torque.
Run the machine at low speed first, then check pressure, noise and leaks.

Frequently Asked Questions

What is the 92G71-00100 Hydraulic Pump?

The 92G71-00100 Hydraulic Pump is a replacement hydraulic pump for Mitsubishi forklifts under part numbers 92G71-00100, 92G7100100.

Which Mitsubishi models does the 92G71-00100 Hydraulic Pump fit?

It is listed for FD135N-150N, F15D, 6M60-TL, FD150N, F24B. If you are unsure, send your machine nameplate to LIONKITS for confirmation.

How do I know my hydraulic pump is failing?

Typical signs are slow or weak movement on all functions, whining or knocking noise, hot hydraulic oil, metal particles in the filter or case drain and erratic or spongy movement.